全國咨詢熱線
生產能力：800/1200 kg/h 電機功率：1.5 kW 切菜規格：800/1200 kg/h 尺寸：1300×600×1050 mm/1800×710×103
凍肉切丁機液體輸送部件在香腸加工設備中的應用是較多的，對于此類部件，日常清洗時，要求用清水在管路內多次循環，保證清洗質量。
Application of frozen meat dicing machine liquid conveying parts in sausage processing equipment is more, for such parts, daily cleaning requirements, with water repeatedly in the pipeline to ensure the quality of cleaning.
總之，香腸加工設備傳動系統的維護保養工作強調的是潔凈、潤滑，要勤檢查、勤清洗、勤整理、勤更換，是傳動系統始終處于良好的工作狀態。
In conclusion, the maintenance work of the sausage processing equipment transmission system emphasizes cleanliness, lubrication, frequent inspection, frequent cleaning, frequent cleaning and frequent replacement. The transmission system is always in good working condition.
凍肉切丁機軸承和滑動、旋轉摩擦面等要選用食品級的潤滑油脂來潤滑，但不允許潤滑油流入食品內。
Frozen meat dicing machine, rotary bearing and sliding friction surface to use food grade grease to lubricate, but does not allow the lubricating oil into food.
凍肉切丁機清潔、檢查并保證密封件的完好功效，也是傳動系統維護保養不可缺少的工作。
Meat dicing machine cleaning, check and ensure that the seal is good effect, the transmission system maintenance job.
凍肉切丁機與肉直接接觸的傳動部件需要經常拆卸、清洗，還需同時檢查其磨損程度，如有磨損及時更換。
Transmission parts in direct contact with meat and meat dicing machine needs regular removal, cleaning and disinfection, it needs to check the degree of wear, such as wear change in time.
1、操作前將設備放置在水平地面，確保機器放置平穩可靠;確定設備插頭接觸良好，無松動，無水跡;
1, before operation, the equipment is placed on the horizontal ground to ensure that the machine is placed smoothly and reliably; it is sure that the contact plug is in good contact, no loosening and no water trace.
2、檢查旋轉料筒內或輸送帶上是否有異物，如有異物必須清理干凈，以免引起刀具損壞;
2, check whether there are foreign objects in the rotary barrel or conveyor belt, such as the foreign objects must be cleaned up so as not to cause the tool damage.
3、操作、調整根據所需加工的菜類選擇切割模式，離心切片機用于瓜薯類硬菜的切片，豎刀部分可將葉類軟菜或切好的片加工成不同規格的塊、丁、菱形等各種形狀;
3, operation and adjustment. According to the processed dishes, we choose the cutting mode. The centrifugal slicer is used for slices of hard potatoes, and the vertical part can be processed into various shapes such as blocks, diamonds, rhombus and so on.
4、安裝豎刀，先轉動可調偏心輪，使刀架行下死點后，再使刀架向上抬起1-2毫米，使豎刀與輸送帶接觸后，緊固螺母把豎刀緊固在刀架上。如果刀架抬起高度小，蔬菜有可能連刀，如果刀架抬起高度過大，有可能切壞輸送帶;
4, install the vertical knife, rotate the adjustable eccentricity wheel first, make the tool carriage reach the bottom dead center, and then raise the tool holder up to 1-2 millimeters, so that after the vertical cutter contacts the conveyor belt, the fastening nut can fasten the vertical knife on the tool carrier. If the height of the knife lift is small, the vegetables may be connected with the knife, and if the height of the tool holder is too high, it may be able to cut the conveyor belt.
公司服務于客戶，以質量上乘、合理和完善的售后服務與客戶攜手奮進，共同發展。質量保證，歡迎咨詢洽談。
The company serves the customer in all directions, with the high quality, the reasonable price and the perfect after sale service and the customers to advance hand in hand, and develop together. Quality assurance, welcome to consult the negotiation.