全國咨詢熱線
生產能力：800/1200 kg/h 電機功率：1.5 kW 切菜規格：800/1200 kg/h 尺寸：1300×600×1050 mm/1800×710×103
現在一些大型的食品加工設備開始走進人們的視線中，但是人們對于這些大型設備的認識還不過深刻，今天就在這里簡單的給大家介紹一下蔬果切丁機應該如何使用及其保養的注意事項。
Now some large-scale food processing equipment has come into people's sight, but people's understanding of these large-scale equipment is still profound. Today, I will briefly introduce how to use and maintain the fruit and vegetable Dicer.
切丁機 指適用于脫水蔬菜、速凍蔬菜加工廠及食品醬菜行業加工各種根、莖類蔬菜成正方體及長方體形狀的機器總稱。那么切丁機在使用前要做哪些準備工作呢？
Dicer refers to the general name of machine which is suitable for processing various root and stem vegetables into cube and cuboid shapes in dehydrated vegetables, frozen vegetable processing plants and food and pickle industries. So what preparation should be done before using the Dicer?
1、仔細檢查切丁機是否存在缺、損、松問題，確保機器處于完好狀態。
1. Carefully check whether there are defects, damages and looseness in the cutting machine to ensure that the machine is in good condition.
2、檢查殼體內是否有異物存在，將殼體內異物掉，否則容易引起刀片的損壞。
2. Check whether there is any foreign matter in the shell, and remove the foreign matter in the shell, otherwise it is easy to cause damage to the blade.
3、清理操作場地，檢查電源電壓是否與本機使用電壓相符，接志處是否可靠連接地線.合上開關，按下＂開＂按鈕，檢查轉向是否正確（面對推料撥盤，推料撥盤逆時針?lè)较蛐D(zhuǎn)為正確），否則，切斷電源調整接線。
3. Clean the operation site, check whether the power supply voltage is consistent with the use voltage of the machine, and whether the ground wire is reliably connected at the grounding mark. Close the switch, press the "on" button, and check whether the steering direction is correct (when facing the pusher dial, the pusher dial rotates counterclockwise to be correct). If not, cut off the power supply and adjust the wiring.
4、接通水源，以備使用。
4. Connect the water source for use.
切丁機的保養問題：
Maintenance problems of Dicer:
1、每次使用后必須對機器進行清洗，尤其是物料通過的地方和通道，保持切丁機的干凈。
1. After each use, the machine must be cleaned, especially the place and passage where the materials pass, to keep the cutter clean.
2、每次使用后，應細心檢查切丁機所有的切割刀具是否有損壞或磨鈍，檢查梳子刀口是否正?；驌p壞.每周拆卸一次圓盤切絲組合刀具和橫切斷組合刀具（拆卸時要小心謹慎，使用專用工具，以免傷手），并進行適當?shù)那逑?當切丁機重新裝配時，切丁機須用無味的食物油進行保養，安裝前必須在切絲軸和切斷軸上涂抹上食物油，以保證其拆卸方便。
2. After each use, carefully check whether all cutting tools of the Dicer are damaged or blunt, and check whether the comb blade is normal or damaged. Dismantle the disc cutting combination tool and the transverse cutting combination tool once a week (be careful when disassembling, use special tools to avoid hurting hands), and clean them properly. When the Dicer is reassembled, the Dicer must be non-toxic Before installation, food oil must be applied on the cutting shaft and cutting shaft to ensure convenient disassembly.
3、每?jī)芍芙o齒輪與鏈條注油一次。
3. Oil the gear and chain every two weeks.
4、切丁機各種刀具的修磨。
4. Grinding of all kinds of cutting tools of the cutting machine.
以上果蔬 切丁機 為您介紹的詳細內容，更多內容請咨詢我們 公司官網http://avcrowdlimeera.com
Please refer to our website for more details of the above fruit and vegetable Dicer http://avcrowdlimeera.com