全國咨詢熱線
切絲切片機在工作中，會進高速的運轉，這會讓切片機的軸承承受著巨大的壓力，也讓它長時間使用容易被損壞。所以大家要學會如何更換軸承，如果壞了之后，用戶可以用小鉗子，把它去掉，如果出現把滾壞故障，大家需要從開關的方向，開始敲擊，才可以把把滾取下來
When the slicer is working, it will run at high speed, which will not only make the bearing of the slicer bear great pressure, but also make it easy to be damaged after long-term use. Therefore, we should learn how to replace the bearing. If it is broken, the user can use small pliers to remove it. If there is a roll failure, we need to knock it from the direction of the switch before we can remove the roll
這方面大家只要是實驗過兩次之后就可以輕松做到。當然如果覺得麻煩的話，可以找人員來處理。大家在更換的時候，一定要按照正確的順序來進行，把東西卸掉之后再進行安裝，這樣可以避免出現順序上的錯誤，導致機械無法正常使用，這點在一些新手上很容易出現。
We can easily do this as long as we have experimented twice. Of course, if you feel troublesome, you can find professionals to deal with it. When you replace, you must do it in the correct order. Remove the things and then install them. In this way, you can avoid sequence errors, resulting in the failure of the machine to work normally. This is easy for some novices.
另外比較容易損耗的配件就是刀具了，刀具每次都要快速的進行切割藥材。這對刀片是個巨大的考驗，也是切片機中容易出現問題的部件，所以平時要多檢查刀片是否出現問題。如果是出現傾斜之類的問題，那么大家在使用的時候，要多注意進行校正就行了，還要多磨一下，保持它的鋒利。
In addition, the accessories that are easy to lose are the cutting tools. The cutting tools should cut medicinal materials quickly and efficiently every time. This is a huge test for the blade, and it is also the most problem prone part in the slicer. Therefore, it is necessary to check whether there is a problem with the blade at ordinary times. If there are problems such as inclination, you should pay more attention to correction when using it, and grind it more to keep it sharp.
