全國咨詢熱線
切片機是切制薄而均勻組織片的機械，組織用堅硬的石蠟或其他物質支持，每切一次借切片厚度器自動向前（向刀的方向）推進所需距離，厚度器的梯度通常為1微米。切制石蠟包埋的組織時，由于與前一張切片的蠟邊粘著，而制成多張切片的切片條。
The slicer is a machine for cutting thin and uniform tissue slices. The tissue is supported by hard paraffin or other substances. Each cut is automatically pushed forward (towards the direction of the knife) by the slicer thickness. The gradient of the thickness is usually 1 micron. When cutting paraffin embedded tissue, it is made into slice strips of multiple slices because it adheres to the wax edge of the previous slice.
1.有著豐富制造經驗
1. Rich manufacturing experience
切片機的質量好技術很關鍵，但是制造經驗同樣很重要，要保證有著豐富的制造經驗，這樣才可以嚴格的把控制造中的每個環節，保證制造出來的機器外觀上無瑕疵，性能方面穩定。
The quality of the slicer is good, the technology is very important, but the manufacturing experience is also very important. We should ensure that we have rich manufacturing experience, so that we can strictly control each link in the manufacturing, and ensure that the manufactured machine has no defects in appearance and stable performance.
2.生產廠家
2. Manufacturer
采購切片機要注意挑選生產廠家，企業要知道，只有生產廠家才會有的技術，保證切片效果精 準，完全符合企業的要求，保證企業產品質量。比較好的是具有自主研發團隊，技術方面要更具優勢，出來的機器質量更好。
When purchasing slicers, pay attention to selecting manufacturers. Enterprises should know that only manufacturers have technology to ensure accurate slicing effect, fully meet the requirements of enterprises and ensure the product quality of enterprises. It's better to have an independent R & D team, have more advantages in technology, and the quality of the machines is better.
3.有著完善細致的售后
3. Have perfect and meticulous after-sales service
機器購買回企業之后是需要長期的使用，使用中也會發生各種問題，若是切片設備廠家有著完善細致的售后，那么企業便可以無后顧之憂，節省維修維護成本。
After the machine is purchased back to the enterprise, it needs long-term use, and various problems will occur in use. If the slicing equipment manufacturer has perfect and detailed after-sales service, the enterprise can worry free and save maintenance costs.
4.功能求精不求多
4. Function refinement is not required
購買切片的機器不要選擇多功能的，多功能的雖然好，但是若是企業是單一的使用功能，就沒有必要，因為相比較而言，多功能的不如單一功能，所以要求精不求多。
Do not choose multi-functional machines when buying slicing machines. Although multi-functional machines are good, they are not necessary if the enterprise uses a single function, because in comparison, multi-functional machines are not as good as single functions, so they require more precision.
