全國咨詢熱線
生產能力：800/1200 kg/h 電機功率：1.5 kW 切菜規格：800/1200 kg/h 尺寸：1300×600×1050 mm/1800×710×103
冷凍切片機是醫院病理科必備的設備，用于手術中提取組織的快速冷凍切片，為手術提供病理依據。冷凍切片機的制冷溫度在-30℃以下，加半導體制冷臺，可使溫度達到-50℃。
Frozen slicing machine is a necessary equipment in hospital pathology department. It is used to extract tissue frozen sections quickly and provide pathological basis for surgery. The refrigeration temperature of the freezing slicing machine is below -30 and the semiconductor refrigeration platform can make the temperature reach -50 degrees.
搖柄與進刀位置不對應，原因：機械傳動部分錯位，維修方法：調整對應位置后再安裝皮帶并擰緊定位卡，在運動摩擦部位加機油潤滑。
The rocking handle and the position of the knife do not correspond, the reason: the mechanical transmission part of the dislocation, maintenance method: after adjusting the corresponding position, then install the belt and tighten the positioning card, lubricating oil in the friction parts of the movement.
冷臺溫度顯示錯誤代碼F13、F7操作失靈，原因：冷臺溫度傳感器失效。此傳感器為負溫度系數熱敏電阻，25℃時電阻約為6kΩ，應急使用時可在P5插口上串10K電位器將冷臺顯示溫度調成-40℃，或者直接拔去P5插頭。除冷臺溫度顯示“—”外，其他一切正常，不影響使用。
The temperature display error code F13 and F7 operation failed. The reason is: the cold platform temperature sensor is invalid. The sensor is a negative temperature coefficient thermistor, and the resistance is about 6K Omega at 25 C. When using the P5, the 10K potentiometer can be used to adjust the temperature of the cold table to -40 C, or to pull the P5 plug directly. Except for the temperature of the cooling stand showing "-", everything else is normal, which does not affect the use.
再從刀架上直接加工切刀片取下，擦拭干凈后放置在刀盒內。
Then the blade is removed directly from the tool carrier, cleaned and cleaned, and placed in the knife box.
我們?cè)谑褂们衅兜臅r(shí)候，一定要格外小心，因?yàn)槠涞度蟹浅５匿h利，如果誤操作的話定會造成嚴重的傷害，不可以直接的用手去接觸切刀片，也不可以將切刀片隨意的亂放。
When we use a slicer, we must be very careful because the blade is very sharp, and if the operation is wrong, it will cause serious damage. It is not possible to contact the blade directly with the hand, nor can the blade be randomly placed in random.
本文由切絲切片機為您提供，我們的網站是:http://avcrowdlimeera.com我們將以全心全意的熱情為您提供更的服務，歡迎您的訪問!
This article is provided by the cut silk slicing machine for you. Our website is: http://avcrowdlimeera.com we will provide you with more quality service and welcome your visit with wholehearted enthusiasm.