全國咨詢熱線
生產能力：800/1200 kg/h 電機功率：1.5 kW 切菜規格：800/1200 kg/h 尺寸：1300×600×1050 mm/1800×710×103
小型切辣椒機的使用和操作
Use and Operation of Small Chilli Cutting Machine切辣椒機其結構合理，自動切辣椒切塊機操作方便，干辣椒切塊機調整簡單，維修方便，干辣椒切割機低廉，全身封閉，減少現場及空氣粉塵，健康。磁性材料設備將混合材料的鐵,鐵很容易,提高刀具的使用壽命,減少干辣椒機器設備操作對兩人來說,方便和快速自動切辣椒部分機、切辣椒,胡椒,辣椒,切辣椒的大小由客戶自己定制的,是國內辣椒切成更的設備。
The structure of the pepper cutter is reasonable, the automatic pepper cutter is easy to operate, the adjustment of the pepper cutter is simple, the maintenance is convenient, the price of the pepper cutter is low, the whole body is closed, the dust in the field and air is reduced, and the health is safe. Magnetic material equipment will mix materials of iron and iron easily, improve tool life, reduce the operation of dry pepper machine equipment for two people, convenient and fast automatic pepper cutting machine, cut pepper, pepper, pepper, pepper, cut pepper size customized by customers, is the most professional domestic pepper cutting equipment.
小花椒切割機主要由機架、輸送帶、壓力帶和塔輪調速機構組成。由于垂直刀模擬了手工切辣椒的原理，切出的辣椒表面光滑，形狀規則。
The small pepper cutter is mainly composed of frame, conveyor belt, pressure belt and tower wheel speed regulating mechanism. Because the vertical knife simulates the principle of manual cutting of pepper, the surface of the cut pepper is smooth and the shape is regular.
產品使用
Product use
辣椒的視頻切割部分會自動將材料通過兩條傳送帶輸入圓刀組進行切割。更大材料尺寸為500mm。切割長度可根據用戶要求定制。
The video cutting part of the chili pepper automatically cuts the material through two conveyor belts into the round knife set. The maximum material size is 500 mm. Cutting length can be customized according to user requirements.
小型商用辣椒切割機產量大，操作簡單，可配備自動送料電梯，節省人工。機身采用不銹鋼制造，故障少，維修方便，使用壽命長，衛生要求高。
Small commercial pepper cutter has large output and simple operation. It can be equipped with automatic feeding elevator to save labor. The fuselage is made of stainless steel with fewer faults, convenient maintenance, long service life and high sanitation requirements.
產品操作
Product Safety Operation
將機器置于水平工作位置，確保機器放置平穩、可靠。
Place the machine in a horizontal working position to ensure that the machine is placed smoothly and reliably.
使用前檢查各部件，運輸過程中緊固件是否松動，運輸過程中開關、電源線是否損壞，并及時采取相應措施。
Check the parts before use, whether the fasteners are loose during transportation, whether the switches and power lines are damaged during transportation, and take corresponding measures in time.
3.檢查轉動滾筒或傳送帶上是否有異物。如有異物，應及時清理，以免損壞刀具。
3. Check whether there are foreign bodies on the rotating drum or conveyor belt. If there is any foreign body, it should be cleaned up in time to avoid damage to the tool.
確保電源電壓與本機額定電壓一致。將本機電源線連接全極，遠距離斷開電源。打開電源。按“開”鍵檢查轉向。否則，切斷電源，調整線路。
Ensure that the power supply voltage is consistent with the rated voltage of the unit. Connect the power line of the machine to the all-pole and disconnect the power supply at a long distance. Turn on the power. Press the "Open" button to check the steering. Otherwise, cut off the power supply and adjust the circuit.